Hello everyone, just a quick one for anyone dealing with this same issue. This issue seems to happen when you attempt to home the carriage of your printer using the G28 command or attempting to create a mesh with G29. This issue seems to be caused by a bug in the Safe Homing code of […]
Fixing the “MCU ‘mcu’ shutdown: ADC out of range” Issue on Klipper/Mainsail
Hey everyone, I just wanted to write something up to help anyone who is having the issue “MCU ‘mcu’ shutdown: ADC out of range” when booting your printing board boots on any Klipper system. What does the error mean? This error means that your device detected that one of the temperature sensor is out of […]
Fixing a da Vinci Jr. 1.0 with a Broken Y Axis
Not long ago, I purchased a da Vinci Jr. 1.0 3D printer from ebay. This printer was being advertised as “For Parts Only” with no real description as to what was damaged on the printer. I decided to purchase it in order to take a shot at fixing it. I purchased it for about $110 […]
Upgrading Folgertech Prusa i3: New Leadscrews
Good day readers, in today’s article I will be showing you how I upgraded my old Folgertech Prusa i3 Acrylic to use T8 Leadscrews instead of the stock 5mm threaded rod included in the kit. So. you might be asking yourself, “Why should I upgrade to leadscrews?”, here are some reasons why you should make […]
Heimdall 3D Printer Files Now On Github
Hello readers, I just wanted to let all of you know that the files for the Heimdall 3D Printer are on Github. You can go through them, make changes, or even contribute to the project. You can also now build yourself one, and modify the printer the way you like and then contribute the changes […]