Good day readers, in today’s post I would like to show you my new custom made mostly 3D Printed PCB vice. I made this vice because I have always wanted to have a PCB vice in order to de-solder and solder components into circuit boards easily. Now that I am getting more into electronics, I […]
Upgrading Folgertech Prusa i3: New Leadscrews
Good day readers, in today’s article I will be showing you how I upgraded my old Folgertech Prusa i3 Acrylic to use T8 Leadscrews instead of the stock 5mm threaded rod included in the kit. So. you might be asking yourself, “Why should I upgrade to leadscrews?”, here are some reasons why you should make […]
First Layer Of Your Prints Always Too High? You Might Want To Read This.
Hello Everyone. For a while, I have been facing some issues with my first layer height being always too far away from the bed. Even after leveling properly leveling bed it will always about 3mm away from the bed, which did not allow my prints to stick at all to the bed. Today I have […]